QUICK REFERENCES

Here you can free of charge download russian Standards (GOST) on threads, thread workpieces and thread forming Tools; Drawings of taps, thread rolling and cutting dies and other tools; familiarize with manuals and instructions to thread-rolling and thread-cutting machine tools and heads, engineering quick references and other helpful information.

The information is placed on the given page in the education-fact-finding purposes, is not official and is not intended for commercial use.

In the quick reference was used the information of sites , chipmaker.ru, in-teh.ru and stroyinf.ru.

For viewing documents in a format djvu and pdf to you can it is required DjVuBrowser and Adobe Reader .

GOSTs

Bolts, screws and nuts. Specifications. GOST 1759.0-87 [Download].

Chasers thread-cutting flat. Specifications. GOST 2287-88. [Download].

Dies Яircular for a metric thread. Tolerances on a thread. GOST 17587-74. [Download].

Dies Яircular. Specifications. GOST 9740-71. [Download].

Dies thread rolling flat. Specifications. GOST 2248-80. [Download].

Dies thread rolling circular. Specifications. GOST 9539-72. [Download].

Cutters turning threads with plates from a rapid machining steel. A construction and the sizes. GOST 18876-73. [Download].

Cutters turning threads with plates from a hard alloy. A construction and the sizes. GOST 18885-73. [Download].

Taps chipless nut. A construction and the sizes. GOST 18840-73. [Download].

Taps chipless nut with curved shaft. A construction and the sizes. GOST 18841-73. [Download].

Taps chipless. Tolerances on a thread. GOST 18843-73. [Download].

Taps chipless. The executive sizes. GOST 18842-73. [Download].

Taps chipless machine-manual. A construction and the sizes. GOST 18839-73. [Download].

Taps chipless. Technical requirements. GOST 18844-74. [Download].

Taps nut. A construction. GOST 1604-71. [Download].

Taps nut with curved shaft. A construction and the sizes. GOST 6951-71. [Download].

Taps for a inch thread. Tolerances on a thread. GOST 7250-60. [Download].

Taps for a taper thread. Specifications. GOST 6227-80. [Download].

Taps for a trapezoidal thread. Tolerances on a thread. GOST 19831-74. [Download].

Taps for a pipe cylindrical thread. Tolerances. GOST 19090-93. [Download].

Taps. Tolerances on manufacture of a threading part. GOST 16925-93 [Download].

Taps machine with screw grooves. A construction and the sizes. GOST 17933-72. [Download].

Taps machine and manual. A construction and the sizes. GOST 3266-81. [Download].

Taps. The executive sizes. GOST 17039-71. [Download].

Taps. Specifications. GOST 3449-84. [Download].

Thread conic valves and bulbs for gases. GOST 9909-81. [Download].

Thread conic inch with a profile angle 60. GOST 6111-52. [Download].

Thread conic for elements of boring columns. A profile, sizes, tolerances. GOST 28487-90. [Download].

Thread conic for elements of boring columns. A profile, sizes, technical requirements. GOST R 50864-96 [Download].

Thread round for sanitary-engineering armature. A profile, the basic sizes, tolerances. GOST 13536-81. [Download].

Thread metric. The basic sizes. GOST 24705-81. [Download].

Thread metric. The basic sizes. GOST 24705-2004. (ISO 724:1993) [Download].

Thread metric. Diameters and pitchs. GOST 8724-81. [Download].

Thread metric with profile MJ. A profile, diameters and pitchs, tolerances. GOST 30892-2002. (ISO 5855-1-99, ISO 5855-2-99, ISO 5855-3-99) [Download].

Thread metric conic. GOST 25229-82. [Download].

Thread trapezoidal one start. Diameters and pitchs. GOST 24738-81. [Download].

Thread trapezoidal. The basic sizes. GOST 24737-81. [Download].

Thread trapezoidal many start. GOST 24739-81. [Download].

Thread trapezoidal one start. Tolerances. GOST 9562-81. [Download].

Thread pipe cylindrical. GOST 6357-81. [Download].

Thread Buttress. A profile and the basic sizes. GOST 10177-82. [Download].

Edison's thread round. A profile, sizes and the limiting sizes. GOST 6042-83. [Download].

Threads: Collection of standards. - Moscow: Standards Publishing House, 1979. - 134 p. [Download].

Bars for metric thread rolling. GOST 19256-73. [Download].

Connections threading for oil pipes and pipelines and threading calibres for them. The common technical requirements. GOST R 51906-2002. [Download].

Hob thread milling cutters. Specifications. GOST 1336-77. [Download].

Manuals and instructions

The instruction to axial thread rolling head VNGN. [Download].

The instruction to axial thread rolling head type NP. [Download].

The instruction to axial thread rolling head type NPT. [Download].

The instruction to thread cutting head RGT-2V and S225-2V. [Download].

The instruction manual to thread cutting head 3T. [Download].

The instruction to thread cutting diehead GOST 21760-76 and 21765-76. [Download].

The Manuals to thread rolling head STD 25004 [Download].

The Manuals to thread rolling machine UPW 12,5 and UPW 25 [Download Part 1], [Download Part 2].

The Manuals to thread grinding machine 5K821v and 5K822v [Download].

The Manuals to thread cutting machine 5991, 5992 and 5993 [Download].

Miscellaneous

Calculation of a rational profile of an intaking part of the thread rolling dies / яomputer program. [Download a demo version].

Tables for definition of the sizes of threads and means of their monitoring (to not disable macroes). [Download].

Suvorov A.A., Zajdlin G.S., Stiskin G.M. Metal-cutting Tools: The Album of drawings. - Moscow: Mashinostroyeniye,1979. - 64 p. [Download].

The help in engineering the thread rolling die of the high wear resistance, non-standard thread forming tools and development of technology of handling threads to you can render our scientific personnel.

http://www.newrolik.narod.ru

MAIN

Technologies

Authors

Literature

Handbook

он псяяйх